Dell EMC Networking CLI 193Routing Information ProtocolCommand Description Mode aauto-summary Enables the RIP auto-summarization mode. RIPdefault-informationoriginate (Router RIPConfiguration)Controls the advertisement of default routes. RIPdefault-metric Sets a default for the metric of distributedroutes.RIPdistance rip Sets the route preference value of RIP in therouter.RIPdistribute-list out Specifies the access list to filter routes receivedfrom the source protocol.RIPenable Resets the default administrative mode of RIPin the router (active).RIPhostroutesaccept Enables the RIP hostroutesaccept mode. RIPip rip Enables RIP on a router interface. ICip rip authentication Sets the RIP Version 2 Authentication Type andKey for the specified interface.ICip rip receive version Configures the interface to allow RIP controlpackets of the specified version(s) to bereceived.ICip rip send version Configures the interface to allow RIP controlpackets of the specified version to be sent.ICredistribute (RIP) Configures OSPF protocol to allowredistribution of routes from the specifiedsource protocol/routers.PIProuter rip Enters Router RIP mode. GCshow ip rip Displays information relevant to the RIP router. PEshow ip rip interface Displays information related to a particular RIPinterface.PEshow ip rip interface brief Displays general information for each RIPinterface.PEsplit-horizon Sets the RIP split horizon mode. RIP
