Layer 2 Switching Commands 433User GuidelinesThis command has no user guidelines.Exampleconsole # traceroute ethernet cfm remote-mpid 32 level 7 vlan 11 mpid 12show ethernet cfm errorsUse the show ethernet cfm errors command to display the cfm errors.Syntaxshow ethernet cfm errors {domain domain-id | level 0-7}• level—Maintenance association level• domain—Name of the maintenance domain (an alphanumeric string ofup to 43 characters in length).Default ConfigurationThis command has no default configuration.Command ModePrivileged Exec, Global Configuration mode and all Configuration submodesUser Guidelines• Level—The maintenance association level• SVID—The service identifier• MPID—The maintenance endpoint identifier• DefRDICcm—A remote MEP reported the RDI bit in a CCM.• DefMACStatus—Some remote MEP reported its Interface Status TLV assomething other then isUp.• DefRemoteCCM—The MEP did not receive valid CCMs from at leastone of the remote MEPs• DefErrorCCM—The MEP has received at least one invalid CCM whoseCCM interval has not yet timed out.
