Switch Management Commands 2048information such as source address, destination address, control packet type,packet length, and the interface on which the packet is received ortransmitted is displayed on the console. Use the “no” form of this commandto disable MLD tracing.Syntaxdebug ipv6 mld packet [receive | transmit]no debug ipv6 mld packet [receive | transmit]Default ConfigurationDisplay of MLD traces is disabled by default.Command ModePrivileged Exec mode.User GuidelinesDebug output should be enabled with caution. Switch behavior may beadversely affected by the additional processing load incurred from enablingdebug.Exampleconsole#debug ipv6 mld packetdebug ipv6 pimdmUse the debug ipv6 pimdm command to trace PIMDMv6 packet receptionand transmission. The receive option traces only received PIMDMv6 packetsand the transmit option traces only transmitted PIMDMv6 packets. Whenneither keyword is used in the command, then all PIMDMv6 packet traces aredumped. Vital information such as source address, destination address,control packet type, packet length, and the interface on which the packet isreceived or transmitted is displayed on the console. Use the “no” form of thiscommand to disable PIMDMv6 tracing.Syntaxdebug ipv6 pimdm packet [receive | transmit]
