Layer 2 Switching Commands 427• vlan-id—VLAN ID representing a service instance that is monitored bythis maintenance association. The range is 1-4093.• secs—Time interval between successive transmissions. The range is 1, 10,60, and 600 seconds. The default is 1 second.Default ConfigurationCCMs are not sent by default.Command ModeGlobal Configuration modeUser GuidelinesThis command has no user guidelines.Exampleconsole(config)#ethernet cfm cc level 1 vlan 15 interval 10ethernet cfm mep levelUse the ethernet cfm mep level command in Interface Configuration modeto create a Maintenance End Point (MEP) on an interface at the specifiedlevel and direction. MEPs are configured per Maintenance Association perMaintenance Domain. Use the no form of the command to delete a MEP.Syntaxethernet cfm mep level 0-7 direction up|down mpid 1-8191 vlan vlan-id• level—Maintenance association level• direction—Up indicates the MEP is facing towards Bridge Relay Entity. Downindicates the MEP is facing towards the LAN.• mpid— Maintenance entity identifier• vlan-id—VLAN on which the MEP operates. The range is 1-4093.Default ConfigurationNo MEPs are preconfigured.
