Switch Management Commands 2222console#show switchManagement Standby Preconfig Plugged-in Switch CodeSW Switch Status Model ID Model ID Status Version--- ---------- --------- ------------- ------------- ------------- ---------1 Mgmt Sw N3024 N3024 OK 6.0.0.02 Stack Mbr N3024 N3024 Updating Code 6.0.0.0console#show switch 1Switch............................ 1Management Status................. Management SwitchSwitch Type....................... 0x63400004Preconfigured Model Identifier.... N3048PPlugged-in Model Identifier....... N3048PSwitch Status..................... OKSwitch Description................ Dell Networking N3048PDetected Code Version............. 6.0.0.0Detected Code in Flash............ 6.0.0.0SFS Last Attempt Status........... NoneSerial Number..................... 13820M0230LFUp Time........................... 0 days 3 hrs 1 mins 13 secsExample – SDM TemplatesThis example shows the SDM Mismatch value in the Switch Status field.console(config)#show switchManagement Standby Preconfig Plugged-in Switch CodeSW Status Status Model ID Model ID Status Version--- ---------- --------- ------------- ------------- ------------- ---------1 Mgmt Sw N4032F N4032F SDM Mismatch 10.7.14.21show systemUse the show system command to display system information.Syntaxshow system [unit]• unit — The unit number.Default ConfigurationThis command has no default configuration.
