Layer 2 Switching Commands 532Syntaxshow ip verify source [interface interface-id]• interface-id: A valid physical interface identifier or port-channel identifierDefault ConfigurationThere is no default configuration for this command.Command ModeUser Exec, Privileged Exec mode, Global Configuration mode and allConfiguration submodesUser GuidelinesThis command has no user guidelines.Exampleconsole#show ip verify source interface gigabitethernet 1/0/1Interface Filter Type IP Address MAC Address Vlan----------- ----------- --------------- ----------------- -----Gi1/0/1 ip 1.2.3.4 00:12:32:43:54:66 1show ip source bindingUse the show ip source binding command to display all bindings (static anddynamic).Syntaxshow ip source bindingDefault ConfigurationThere is no default configuration for this command.Command ModeUser Exec, Privileged Exec mode, Global Configuration mode and allConfiguration submodes
