Layer 2 Switching Commands 612console(config-vlan2000)#exitconsole(config)#mvr vlan 2000console(config)#interface gi1/0/24console(config-if-Gi1/0/24)#switchport mode trunkconsole(config-if-Gi1/0/24)#switchport trunk native vlan 2000console(config-if-Gi1/0/24)#switchport trunk allowed vlan add 2000console(config-if-Gi1/0/24)#mvrconsole(config-if-Gi1/0/24)#mvr type sourceconsole(config-if-Gi1/0/24)#mvr vlan 2000 group 239.1.1.1show mvrUse the show mvr command to display global MVR settings.Syntaxshow mvrDefault ConfigurationThis command has no default configuration.Command ModePrivileged Exec, Global Configuration mode and all Configuration submodesUser GuidelinesThe following table lists the completion messages.The following table explains the output parameters.Message Type Message DescriptionSuccessful Completion Message NoneError Completion Message MVR disabledParameter DescriptionMVR Running MVR running state. It can be enabled ordisabled.MVR Multicast VLAN Current MVR multicast VLAN. It can be inthe range from 1 to 4093.
