Switch Management Commands 2045Use the no form of this command to disable debug tracing of PIMDM packetreception and transmission.Syntaxdebug ip pimdm packet [receive | transmit]no debug ip pimdm packet [receive | transmit]Default ConfigurationDisplay of PIMDM traces is disabled by default.Command ModePrivileged Exec mode.User GuidelinesDebug output should be enabled with caution. Switch behavior may beadversely affected by the additional processing load incurred from enablingdebug.Exampleconsole#debug ip pimdm packetdebug ip pimsm packetUse the debug ip pimsm command to trace PIMSM packet reception andtransmission. The receive option traces only received PIMSM packets and thetransmit option traces only transmitted PIMSM packets. When neitherkeyword is used in the command, then all PIMSM packet traces are dumped.Vital information such as source address, destination address, control packettype, packet length, and the interface on which the packet is received ortransmitted is displayed on the console. Use the no form of this command todisable debug tracing of PIMSM packet reception and transmission.Syntaxdebug ip pimsm packet [receive | transmit]no debug ip pimsm packet [receive | transmit]
