Layer 2 Switching Commands 352DHCPv6 Snooping CommandsDell EMC Networking N1100-ON/N1500/N2000/N2100-ON/N3000/N3100-ON/N4000 Series SwitchesThis section explains the following commands:clear ipv6 dhcp snooping bindingUse the clear ipv6 dhcp snooping binding command to clear all IPv6 DHCPSnooping entries.Syntaxclear ipv6 dhcp snooping binding {* | interface interface-id}• *—Clears all snooping bindings.• interface-id—Clears all snooping bindings on a specified physicalinterface.Default ConfigurationThis command has no default configuration.clear ipv6 dhcp snooping binding ipv6 dhcp snooping verify mac-addressclear ipv6 dhcp snooping binding ipv6 verify bindingipv6 dhcp snooping ipv6 verify sourceipv6 dhcp snooping vlan show ipv6 dhcp snoopingipv6 dhcp snooping binding show ipv6 dhcp snooping bindingipv6 dhcp snooping database show ipv6 dhcp snooping databaseipv6 dhcp snooping database write-delay show ipv6 dhcp snooping interfacesipv6 dhcp snooping limit show ipv6 dhcp snooping statisticsipv6 dhcp snooping log-invalid show ipv6 source bindingipv6 dhcp snooping trust show ipv6 verify– show ipv6 verify source
