Layer 3 Routing Commands 1535console(config-if-vlan15)#ipv6 nd reachable-time 5000ipv6 nd suppress-raUse the ipv6 nd suppress-ra command in Interface Configuration mode tosuppress router advertisement transmission on an interface.Syntaxipv6 nd suppress-rano ipv6 nd suppress-raDefault ConfigurationDisabled is the default configuration.Command ModeInterface Configuration (VLAN, Tunnel, Loopback) modeUser GuidelinesThis command has no user guidelines.ExampleThe following example suppresses router advertisement transmission.console(config)#interface vlan 15console(config-if-vlan15)#ipv6 nd suppress-raipv6 routeUse the ipv6 route command in Global Configuration mode to configure anIPv6 static route. Use the no form of the command to remove a preference,an individual next hop, or all next hops for a route. Using the no ipv6 routedistance form causes the system to use the system default administrativedistance.Syntaxipv6 route distance
