Security Commands 917Command ModeRADIUS Server Configuration modeUser GuidelinesThere are no user guidelines for this command.In an Access-Request, encrypted passwords are sent using the RSA MessageDigest algorithm (MD5).If no encryption parameter (7) is present, the key string is interpreted as anunencrypted shared secret.Keys are always displayed in their encrypted form in the runningconfiguration.The encryption algorithm is the same across switches. Encrypted passwordsmay be copied from one switch and pasted into another switch.Command HistoryUpdated in version 6.3.0.1 firmware.ExampleThe following two examples globally configure the RADIUS server key for allconfigured servers. The two examples are identical in effect.console(config)#radius-server host 1.2.3.4console(config-auth-radius)#key "This is a key string"console(config-auth-radius)#key 0 "This is a key string"msgauthUse the msgauth command to enable the message authenticator attribute tobe used for the RADIUS Authenticating server being configured. Use the“no” form of this command to disable the message authenticator attribute.Syntaxmsgauthno msgauth
