Layer 2 Switching Commands 364User GuidelinesThis command has no user guidelines.Example(console)#show ipv6 dhcp snoopingDHCP snooping is DisabledDHCP snooping source MAC verification is enabledDHCP snooping is enabled on the following VLANs:11 - 30, 40Interface Trusted Log Invalid Pkts--------- -------- ----------------Gi1/0/1 Yes NoGi1/0/2 No YesGi1/0/3 No YesGi1/0/4 No NoGi1/0/6 No Noshow ipv6 dhcp snooping bindingUse the show ipv6 dhcp snooping binding command to display the IPv6DHCP snooping configurationSyntaxshow ipv6 dhcp snooping binding [{static|dynamic}] [interface interface-id| port-channel port-channel-number] [vlan vlan-id]• static—Only show static entries.• dynamic—Only show dynamic entries.• interface-id—Limit the display to entries associated with physicalinterface-id.• vlan-id—Limit the display to entries associated with VLAN vlan-id.• port-channel-number—Limit the display to entries associated with theidentified port channel.Default ConfigurationThis command has no default configuration.
