Layer 2 Switching Commands 393ExampleThe following example shows output with higher than normal CPU usage dueto packets copied to the software forwarding task.console#show process cpuMemory Utilization Reportstatus bytes------ ----------free 1053933568alloc 673873920CPU Utilization:PID Name 5 Secs 60 Secs 300 Secs---------- ------------------- -------- -------- --------1129 osapiTimer 0.00% 0.00% 0.01%1133 _interrupt_thread 0.09% 0.01% 0.00%1137 bcmCNTR.0 0.24% 0.31% 0.31%1142 bcmRX 23.00% 27.01% 18.01%1147 ipMapForwardingTas 32.97% 37.11% 29.92%1155 bcmLINK.0 0.34% 0.36% 0.36%1156 cpuUtilMonitorTask 0.09% 0.05% 0.04%1170 nim_t 0.09% 0.08% 0.07%1208 dot1s_timer_task 0.00% 0.00% 0.01%1222 snoopTask 0.00% 0.00% 0.01%1291 RMONTask 0.00% 0.02% 0.03%1293 boxs Req 0.00% 0.01% 0.01%------------------------------ -------- -------- --------Total CPU Utilization 27.31% 28.97% 31.01%show interfacesUse the show interfaces command to list the traffic statistics for one ormultiple interfaces. If no parameter is given, all interfaces are shown.Syntaxshow interfaces [ interface-id ]• interface-id—A physical interface id (i.e., a 1G, 10G, or 40G interface) instandard interface format.
