Layer 3 Routing Commands 1693Router......................................... 0Network........................................ 0Summary Net.................................... 0Summary ASBR................................... 0Type-7 Ext..................................... 0Opaque Link.................................... 0Opaque Area.................................... 0Type-5 Ext..................................... 0Self-Originated Type-5 Ext..................... 0Opaque AS...................................... 0Total.......................................... 0show ip ospf interfaceUse the show ip ospf interface command to display the information for theVLAN or loopback interface. The long form of the command displays theconfiguration of flood blocking.Syntaxshow ip ospf interface [vrf vrf-name][vlan vlan-id | loopback loopback-id]• loopback-id—A configured loopback interface identifier. (Range: 0-7)• vlan-id—A configured VLAN identifier. (Range: 0-4093)• vrf-name—The name of the VRF instance on which the commandoperates. If no vrf parameter is given, information for the default (global)router instance is shown.Default ConfigurationThis command has no default configuration.Command ModeUser Exec, Privileged Exec modes, Global Configuration mode and allConfiguration submodesUser GuidelinesThis command has no user guidelines.
