Dell EMC Networking CLI 155Priority Flow ControlLayer 3 Routing CommandsARP (IPv4)openflow Enables OpenFlow on the switch (if disabled)and enters into OpenFlow configuration mode.GCpassive Sets the switch to wait for the controller toinitiate the connection.OFCprotocol-version Selects the version of the protocol in which tooperate.OFCshow openflow Displays OpenFlow configuration and status. PE,GCa. For the meaning of each Mode abbreviation, see Mode Types .Command Description Mode aa. For the meaning of each Mode abbreviation, see Mode Types .Data Center BridgingCapability ExchangeCommandsEnables Priority-Flow-Control (PFC) on aninterface.DCBpriority-flow-control priority Enables the priority group for lossless (no-drop)or lossy (drop) behavior on the selectedinterface.DCBclear priority-flow-controlstatisticsClears all or interface Priority-Flow-Controlstatistics.PEshow interfaces priority-flow-controlDisplays the global or interface priority flowcontrol status and statistics.PECommand Description Mode aarp Creates an Address Resolution Protocol (ARP)entry.GCCommand Description Mode a
