Security Commands 936test 6.6.6.6 1812 Noswitch-top#show aaa servers authentication name CoA-Server-1RADIUS Server Name............................. CoA-Server-1Current Server IP Address...................... 1.1.1.1Number of Retransmits.......................... 3Timeout Duration............................... 15Deadtime....................................... 0Port........................................... 3799Source IP...................................... DefaultRADIUS Accounting Mode......................... DisabledSecret Configured.............................. YesMessage Authenticator.......................... EnableNumber of CoA Requests Received...................... 203Number of CoA ACK Responses Sent..................... 111Number of CoA NAK Responses Sent...................... 37Number of Coa Requests Ignored.........................55Number of CoA Missing/Unsupported Attribute Requests...18Number of CoA Session Context Not Found Requests.......5Number of CoA Invalid Attribute Value Requests.........11Number of Administratively Prohibited Requests.........3show radius statisticsUse the show radius statistics command to show the statistics for anauthentication or accounting server.Syntaxshow radius statistics [accounting | authentication] [{ipaddress | hostname| name servername}]• accounting | authentication—The type of server (accounting orauthentication).• ipaddress—The RADIUS server host IP address.• hostname—Host name of the RADIUS server host. (Range: 1–158characters). The command allows spaces in the host name when specifiedin double quotes. For example, console(config)#snmp-server host “hostname”• servername—The alias used to identify the server.