Switch Management Commands 2187Syntaxset description unit description• unit — The switch identifier. (Range: 1–12)• description — The text description. (Range: 1–80 alphanumericcharacters)Default ConfigurationThis command has no default configuration.Command ModeStack Configuration modeUser GuidelinesThis command has no user guidelines.ExampleThe following example displaysconsole(config)#stackconsole(config-stack)#set description 1 “unit 1"slotUse the slot command to configure a slot in the system. The unit/slot is theslot identifier of the slot located in the specified unit. The cardindex is theindex to the database of the supported card types (see the command showsupported cardtype) indicating the type of card being preconfigured in thespecified slot. The card index is a 32-bit integer. If a card is currently presentin the slot that is unconfigured, the configured information will be deletedand the slot will be reconfigured with default information for the card. Thesupported card types are:• Dell EMC Networking N2024• Dell EMC Networking N2024P• Dell EMC Networking N2048• Dell EMC Networking N2048P• Dell EMC Networking N3024
