Switch Management Commands 2251Time Ranges CommandsTime ranges are used with time-based ACLs to restrict their application dueto specific time slots.This section explains the following commands:time-range [name]Use the time-range command to globally enable or disable the eventnotification service of the time range component. If disabled, ACLs usingtime ranges are not started.Use the optional name parameter to create a time range consisting of oneabsolute time entry and/or one or more periodic time entries. If a time rangeby this name already exists, this command enters Time-Range Configurationmode to allow updating the time range entries.Use the no form of the command to disable the event notification service.Use the no form of this command with the optional name parameter to deletea time-range identified by name .Syntaxtime-range [name]no time-range [name]• name—A case-sensitive alphanumeric string from 1 to 31 charactersuniquely identifying the time range. An alpha-numeric string is definedas consisting of only alphabetic, numeric, dash, underscore, or spacecharacters.Default ConfigurationTime range event notification is enabled by default.time-range [name] periodicabsolute show time-range
