Layer 2 Switching Commands 432User GuidelinesThis command has no user guidelines.Exampleconsole #ping ethernet cfm mac 00:11:22:33:44:55 level 1 vlan 10 mpid 1 count10traceroute ethernet cfmUse the traceroute ethernet command to generate a link trace message(LTM) from the configured MEP.Syntaxtraceroute ethernet cfm {mac mac-addr| remote-mpid 1-8191} {domaindomain name | level 0-7} vlan vlan-id mpid 1-8191 [ttl 1-255]• level—Maintenance association level• mac-addr—The destination MAC address for which the connectivity needs tobe verified. Either MEP ID or the MAC address option can be used.• remote-mpid—The MEP ID for which connectivity is to be verified; i.e. thedestination MEP ID.• domain— Name of the maintenance domain (an alphanumeric string of up to43 characters in length).• vlan-id— A VLAN associated with the maintenance domain. Range: 1-4093.• mpid— The MEP ID from which the loopback message needs to betransmitted.• ttl— The number of hops over which the LTM is expected to be transmitted.The default number is 64.Default ConfigurationBy default, the traceroute command will send loopback trace messages with aTTL of 64.Command ModePrivileged Exec
