Dell EMC Networking CLI 108Dynamic ARP Inspectionip dhcp snooping log-invalid Enables logging of DHCP messages filtered bythe DHCP Snooping application.ICip dhcp snooping trust Configure a port as trusted for DHCP snooping. ICip dhcp snooping verify mac-addressEnables the verification of the source MACaddress with the client MAC address in thereceived DHCP message.GCshow ip dhcp snooping Displays the DHCP snooping global and perport configuration.PEshow ip dhcp snoopingbindingDisplays the DHCP snooping binding entries. PEshow ip dhcp snoopingdatabaseDisplays the DHCP snooping configurationrelated to the database persistence.PEshow ip dhcp snoopinginterfacesDisplays the DHCP Snooping status of theinterfaces.PEshow ip dhcp snoopingstatisticsDisplays the DHCP snooping filtrationstatistics.PEa. For the meaning of each Mode abbreviation, see Mode Types .Command Description Mode aarp access-list Creates an ARP ACL. GCclear ip arp inspectionstatisticsResets the statistics for Dynamic ARPInspection on all VLANs.PEip arp inspection filter Configures the ARP ACL to be used for a singleVLAN or a range of VLANs to filter invalid ARPpackets.GCip arp inspection limit Configures the rate limit and burst intervalvalues for an interface.ICip arp inspection trust Configures an interface as trusted for DynamicARP Inspection.ICCommand Description Mode a
