Switch Management Commands 2194Default ConfigurationThis command has no default configuration.Command ModesUser Exec, Privileged Exec mode, Global Configuration mode and allConfiguration submodesUser GuidelinesThis command has no user guidelines.ExampleThe following example shows the optic parameters in user readable format.console#show idprom interface tengigabitethernet 1/0/9Type.............................. SFP+Media............................. 10GBASE-LRMSerial Number..................... ANF0L5JDell Qualified.................... YesThe following example shows the optic parameters, but not the IDPROMcontent as the entered activation code in incorrect.console#show idprom interface tengigabitethernet 1/0/9 debug abcType.............................. SFP+Media............................. 10GBASE-LRMSerial Number..................... ANF0L5JDell Qualified.................... Yesshow interfacesUse the show interfaces command to display the traffic statistics for one ormultiple interfaces. If no parameter is given, all interfaces are shown.Syntaxshow interfaces interface-id• interface-id—The ID for any valid physical interface (that is, a 1G, 10G,or 40G interface in standard interface format or a port-channelidentifier).
