Switch Management Commands 2249ip telnet portThe ip telnet port command is used to configure the Telnet TCP portnumber on which the switch listens for Telnet connections.Syntaxip telnet port port number• port number — Telnet TCP port number (Range: 1025–65535)Default ConfigurationThe default value for the Telnet TCP port is 23.Command ModeGlobal ConfigurationUser GuidelinesThe Telnet server TCP port should not be set to a value that might conflictwith other well-known protocol port numbers used on this switch.UDP, TCP and RAW ports reserved by the switch and unavailable for use orconfiguration are:Ports 1, 17, 58, 255, 546, 547, 2222, 4567, 6343, 49160Exampleconsole(config)#ip telnet port 1045console(config)#no ip telnet portshow ip telnetThe show ip telnet command displays the status of the Telnet server and theTelnet TCP port number.Syntaxshow ip telnetDefault ConfigurationThis command has no default configuration.
