Layer 2 Switching Commands 554Syntaxlldp med faststartrepeatcount countno lldp med faststartrepeatcount• count — Number of LLDPPDUs that are transmitted when the protocol isenabled. (Range 1–10)Command ModeGlobal ConfigurationDefault Value3User GuidelinesNo specific guidelines.Exampleconsole(config)# lldp med faststartrepeatcount 2lldp med transmit-tlvThis command is used to specify which optional TLVs in the LLDP MED setare transmitted in the LLDPDUs. There are certain conditions that have tobe met for a port to be MED compliant. These conditions are explained inthe normative section of the ANSI/TIA-1057 specification. For example, theMED TLV 'capabilities' is mandatory. By disabling transmission of the MEDcapabilities TLV, MED is effectively disabled on the interface.Syntaxlldp med transmit-tlv [capabilities] [network-policy] [ex-pse] [ex-pd]no lldp med transmit-tlv [capabilities] [network-policy] [ex-pse] [ex-pd]Command ModeInterface Configuration (Ethernet)
