Switch Management Commands 1905User GuidelinesUse the client-identifier or hardware-address command prior to using thiscommand for an address pool. Use the show ip dhcp pool command to displaypool configuration parameters.Exampleconsole(config-dhcp-pool)#client-identifier 00:23:12:43:23:54console(config-dhcp-pool)#host 192.168.21.131 32ip dhcp bootp automaticUse the ip dhcp bootp automatic command in Global Configuration modeto enable automatic BOOTP address assignment. By default, BOOTP clientsare not automatically assigned addresses, although they may be assigned astatic address. Use the no form of the command to disable automatic BOOTPclient address assignment. Use the show ip dhcp global configurationcommand to display the automatic address assignment configuration.Syntaxip dhcp bootp automaticno ip dhcp bootp automaticDefault ConfigurationAutomatic BOOTP client address assignment is disabled by default.Command ModeGlobal Configuration modeUser GuidelinesThis command has no user guidelines.Exampleconsole#ip dhcp bootp automatic
