Layer 2 Switching Commands 802ExampleThis example shows the various invocations of the command.console(config)#show switchport ethertypeDefault TPID................................... 802.1Configured TPIDs............................... vMAN Custom (1010)console(config)#show switchport ethertype interface gi1/0/1Interface EtherType Secondary TPIDs--------- --------- ---------------Gi1/0/1 802.1console(config-vlan10)#show switchport ethertype interface allconsole(config)#show switchport ethertype interface gi1/0/1Interface EtherType Secondary TPIDs--------- --------- ---------------Gi1/0/1 802.1Gi1/0/2 802.1 VMANGi1/0/3 802.1Gi1/0/4 802.1Gi1/0/5 802.1show vlanUse the show vlan command to display detailed information, includinginterface information and dynamic VLAN type, for a specific VLAN orRSPAN VLAN. The ID is a valid VLAN identification number.Syntaxshow vlan [id vlan-id |name vlan-name ]• vlan-id—A VLAN identifier• vlan-name—A valid VLAN name (Range 1-32 characters)Default ConfigurationThis command has no default configuration.
