Layer 2 Switching Commands 505Syntaxipv6 access-list nameno ipv6 access-list name• name — Alphanumeric string of 1 to 31 characters uniquely identifyingthe IPv6 access list.Default ConfigurationThere is no default configuration for this command.Command ModeGlobal Configuration modeUser GuidelinesThere are no user guidelines for this commandExampleThe following example creates an IPv6 ACL named “DELL_IP6” and entersthe IPv6-Access-List Configuration mode:console(config)#ipv6 access-list DELL_IP6console(Config-ipv6-acl)#ipv6 access-list renameThe ipv6 access-list rename command changes the name of an IPv6 AccessControl List (ACL). This command fails if an IPv6 ACL with the new namealready exists.Syntaxipv6 access-list rename name newname• name — the name of an existing IPv6 ACL.• newname — alphanumeric string from 1 to 31 characters uniquelyidentifying the IPv6 access list.Default ConfigurationThere is no default configuration for this command.
