Layer 3 Routing Commands 1549Exampleconsole#show ipv6 mld host-proxy groupsInterface................................ vlan 10Group Address Last Reporter Up Time Member State Filter Mode Sources------------- -------------- ---------- ----------------- ------------ -------FF1E::1 FE80::100:2.3 00:01:40 DELAY_MEMBER Exclude 2FF1E::2 FE80::100:2.3 00:02:40 DELAY_MEMBER Include 1FF1E::3 FE80::100:2.3 00:01:40 DELAY_MEMBER Exclude 0FF1E::4 FE80::100:2.3 00:02:44 DELAY_MEMBER Include 4show ipv6 mld host-proxy groups detailUse the show ipv6 mld host-proxy groups detail command to displayinformation about multicast groups that MLD Proxy reported.Syntaxshow ipv6 mld host-proxy groups detailDefault ConfigurationThere is no default configuration for this command.Group Address The IP address of the multicast group.Last Reporter The IP address of the host that last sent a membership report for thecurrent group on the network attached to the MLD-Proxy interface(upstream interface).Up Time (insecs)The time elapsed in seconds since last created.Member State Possible values are:• Idle_Member — The interface has responded to the latest groupmembership query for this group.• Delay_Member — The interface is going to send a groupmembership report to respond to a group membership query forthis group.Filter Mode Possible values are Include or Exclude.Sources The number of sources attached to the multicast group.
