Layer 2 Switching Commands 396Broadcast Packets Received..................... 0Total Packets Received with MAC Errors......... 0Jabbers Received............................... 0Fragments/Undersize Received................... 0Alignment Errors............................... 0FCS Errors..................................... 0Overruns....................................... 0Total Received Packets Not Forwarded........... 7Total Packets Transmitted Successfully......... 147070Unicast Packets Transmitted.................... 0Multicast Packets Transmitted.................. 147070Broadcast Packets Transmitted.................. 0Transmit Packets Discarded..................... 0Total Transmit Errors.......................... 0Total Transmit Packets Discarded............... 0Single Collision Frames........................ 0Multiple Collision Frames...................... 0Excessive Collision Frames..................... 0console#show interfaces po1Channel Ports Ch-Type Hash Type Min-links Local Prf------- ----------------------------- -------- --------- --------- --------Po1 Active: Gi1/0/1 Dynamic 7 1 DisabledHash Algorithm Type1 - Source MAC, VLAN, EtherType, source module and port Id2 - Destination MAC, VLAN, EtherType, source module and port Id3 - Source IP and source TCP/UDP port4 - Destination IP and destination TCP/UDP port5 - Source/Destination MAC, VLAN, EtherType, source MODID/port6 - Source/Destination IP and source/destination TCP/UDP port7 - Enhanced hashing modeshow interfaces advertiseUse the show interfaces advertise command to display information aboutauto-negotiation advertisement. The display includes the local configurationand link partner advertisement, in addition to the local advertisement.Syntaxshow interfaces advertise [{gigabitethernet unit/slot/port |tengigabitethernet unit/slot/port | fortygigabitethernet unit/slot/port}]
