Layer 2 Switching Commands 406---- --------------------------------- -----------Forbidden VLANS:VLAN Name---- ---------------------------------Port Gi1/0/1 EnabledState: Disabled Role: DisabledPort id: 128.1 Port Cost: 0Port Fast: No (Configured: no ) Root Protection: NoDesignated bridge Priority: 32768 Address: 1418.7715.2368Designated port id: 0.0 Designated path cost: 0CST Regional Root: 80:00:14:18:77:15:23:68 CST Port Cost: 0BPDUs: Sent: 0, Received: 0show interfaces statusUse the show interfaces status command to display the status for allconfigured interfaces.Syntaxshow interfaces statusDefault ConfigurationThis command has no default configuration.Command ModePrivileged Exec mode, Global Configuration mode and all ConfigurationsubmodesUser GuidelinesPort channels are only displayed if configured. Use the show interfaces port-channel command to display configured and unconfigured port channels.Interfaces configured as stacking ports will show as detached in the output ofthe show interfaces status command.The link state indicates the physical connectivity state of the link. It ispossible that the link is connected physically yet frames are not able to passover the link. Possible causes of this condition are speed or duplex mismatch.The displayed port status information includes the following:
