Layer 2 Switching Commands 606Syntaxmvr group A.B.C.D [count]no mvr group A.B.C.D [count]• A.B.C.D—Specify a multicast group.• count—Specifies the number of multicast groups to configure. Groups areconfigured contiguously by incrementing the first group specified.Default ConfigurationThis command has no default configuration.Command ModeGlobal ConfigurationUser GuidelinesThe following table lists the completion messages.Exampleconsole(config)#mvrconsole(config)#mvr group 239.0.1.0 31console(config)#mvr vlan 10mvr modeUse the mvr mode command in Global Configuration mode to change theMVR mode type. Use the no form of the command to set the mode type tothe default value.Syntaxmvr mode {compatible | dynamic}Message Type Message DescriptionSuccessful Completion Message NoneError Completion Message • Not an IP multicast group address• Illegal IP multicast group address
