Layer 2 Switching Commands 806show vlan private-vlanUse the show vlan private-vlan command to display information about theconfigured private VLANs including primary and secondary VLAN IDs, type(community, isolated, or primary), and the ports which belong to a privateVLAN.Syntaxshow vlan private-vlan [type]Default ConfigurationThis command has no default setting.Command ModePrivileged Exec mode, Global Configuration mode and all ConfigurationsubmodesUser GuidelinesDo not configure private VLANs on ports configured with any of thesefeatures:• Link Aggregation Control Protocol (LACP)• Multicast VLAN Registration (MVR)• Voice VLANIt is recommended that the private VLAN host ports be configured asspanning-tree portfast.The command displays the following information.Parameter DescriptionPrimary Primary VLAN ID.Secondary Secondary VLAN ID.Type Secondary VLAN type. Use the type parameter to display onlyprivate VLAN ID and its type.Ports Ports that are associated with a private VLAN.
