Switch Management Commands 2163[root@kevin ~]# ssh 192.168.12.84 -l dellradiusIf you need to utilize this device or otherwise make changes to theconfiguration, you may contact Kevin at x911.Please, be advised this unit is under test by Kevin.dellradius@192.168.12.84's password:Press 'y' to continue (within 30 seconds) (y/n)Welcome to the N3024 in the Bottom Chassis - 192.168.12.190. This unit islocated in A2 and is currently under test.N3024-C1>Telnet:If you need to utilize this device or otherwise make changes to theconfiguration, you may contact Kevin at x911.Press 'y' to continue (within 30 seconds) (y/n) yPlease, be advised this unit is under test by Kevin.User:rootPassword:******Welcome to the N3024 in the Bottom Chassis - 192.168.12.190. This unit islocated in A2 and is currently under test.N3024-C1>Exampleconsole(config)# banner motd “There is a power shutdown at 23:00hrs today,duration 1 hr 30 minutes.”console(config)# banner motd acknowledgeWhen the MOTD banner is executed, the following displays:IMPORTANT: There is a power shutdown at 23:00hrs today, duration 1 hr 30minutes.Press ‘y’ to continueIf ‘y’ is entered, the following displays:console >If ‘n’ is entered, the session will get disconnected, unless it is a serialconnection.buffersUse the buffers command to configure the rising and falling thresholds forthe issuance of the message buffer SNMP trap and notification via aSYSLOG message.
