Layer 2 Switching Commands 715show classofservice trustUse the show classofservice trust command to display the current trust modesetting for a specific interface.Syntaxshow classofservice trust [{gigabitethernet unit/slot/port| port-channel port-channel-number | tengigabitethernet unit/slot/port | fortygigabitethernetunit/slot/port}]Default ConfigurationThis command has no default configuration.Command ModePrivileged Exec mode, Global Configuration mode and all ConfigurationsubmodesUser GuidelinesIf the interface is specified, the port trust mode of the interface is displayed.If omitted, the port trust mode for global configuration is shown.ExampleThe following example displays the current trust mode settings for thespecified port.console#show classofservice trust gigabitethernet 1/0/2Class of Service Trust Mode: Dot1Pshow diffservUse the show diffserv command to display the DiffServ general information,which includes the current administrative mode setting as well as the currentand maximum number of DiffServ components.NOTE: On the N1500 Series switches, enable Simple RED since thehardware is not capable of Weighted RED.
