Layer 3 Routing Commands 1579• interval — The number of seconds between successive hello transmissions.Range: 0–18000 seconds. Default is 30.Default ConfigurationThe default hello interval is 30 seconds.Command ModeInterface (VLAN) Configuration modeUser GuidelinesThere are no user guidelines for this command.Exampleconsole(config-if-vlan10)#ip pim hello-interval 20ip pim join-prune-intervalThe ip pim join-prune-interval command in Interface (VLAN)Configuration mode to administratively configure the frequency ofjoin/prune messages on the specified interface. Use the no form of thiscommand to return the configuration to the default.Syntaxip pim join-prune-interval intervalno ip pim join-prune-interval• interval — The number of seconds between successive join-prunetransmissions. Range: 0–18000 seconds. Default is 60.Default ConfigurationThe default join/prune interval is 60 seconds.Command ModeInterface (VLAN) Configuration mode
