Layer 2 Switching Commands 607no mvr mode• compatible—Do not allow membership joins on source ports.• dynamic—Send IGMP joins to the multicast source when IGMP joins arereceived on receiver ports.Default ConfigurationThe default mode is compatible.Command ModeGlobal ConfigurationUser GuidelinesThis command has no user guidelines.mvr querytimeUse the mvr querytime command in Global Configuration mode to set theMVR query response time. The query time is the maximum time to wait foran IGMP membership report on a receiver port before removing the port fromthe multicast group after receiving a leave message. The query time onlyapplies to receiver ports and is specified in tenths of a second.Use the no form of the command to set the MVR query response time to thedefault value.Syntaxmvr querytime 1–100no mvr querytimeDefault ConfigurationThe default value is 5 tenths of a second.Command ModeGlobal Configuration
