Switch Management Commands 2036User GuidelinesThe DHCP client has an internal packet tracing capability. This commandturns the packet tracing on.Debug commands should be used with caution. Switch behavior may beadversely affected by the additional processing load incurred by enablingdebug output.ExampleThis example enables DHCP client packet tracing for both transmit andreceive flows.console#debug dhcp packetThe second example is for transmit flow.console#debug dhcp packet transmitThe third example is for receive flow.console#debug dhcp packet receivedebug dhcp server packetUse this command to trace DHCPv4 packets to and from the local DHCPv4server. To disable debugging, use the no form of this command.Syntaxdebug dhcp server packetno debug dhcp server packetDefault ConfigurationDHCP server packet tracing is disabled by default.Command ModePrivileged ExecUser GuidelinesThe DHCP server support an internal packet tracing facility. This commandturns the packet tracing on.
