Layer 2 Switching Commands 556console(config-if-Gi1/0/3)#lldp notificationlldp notification-intervalUse the lldp notification-interval command in Global Configuration modeto limit how frequently remote data change notifications are sent. To returnthe notification interval to the factory default, use the no form of thiscommand.Syntaxlldp notification-interval intervalno lldp notification-interval• interval — The smallest interval in seconds at which to send remote datachange notifications. (Range: 5–3600 seconds)Default ConfigurationThe default value is 5 seconds.Command ModeGlobal Configuration modeUser GuidelinesThis command has no user guidelines.ExampleThe following example displays how to set the interval value to 10 seconds.console(config)#lldp notification-interval 10lldp receiveUse the lldp receive command in Interface Configuration mode to enable theLLDP receive capability. To disable reception of LLDPDUs, use the no formof this command.Syntaxlldp receive
