Layer 2 Switching Commands 347Command ModeUser Exec, Privileged Exec mode, Global Configuration mode and allConfiguration submodesUser GuidelinesThere are no user guidelines for this command.Exampleconsole#show ip dhcp snoopingDHCP snooping is DisabledDHCP snooping source MAC verification is enabledDHCP snooping is enabled on the following VLANs:11 - 30, 40Interface Trusted Log Invalid Pkts--------- -------- ----------------Gi1/0/1 Yes NoGi1/0/2 No YesGi1/0/3 No YesGi1/0/4 No NoGi1/0/6 No Noshow ip dhcp snooping bindingUse the show ip dhcp snooping binding command to display the DHCPsnooping binding entries.Syntaxshow ip dhcp snooping binding [{static | dynamic}] [interface interface-id |port-channel port-channel-number] [vlan vlan-id]• static | dynamic — Use these keywords to filter by static or dynamicbindings.• interface-id — The physical interface for which to show bindings.• port-channel-number—The port channel for which to show bindings.• vlan-id — The VLAN identifier for which to show bindings.
