Layer 2 Switching Commands 306ExampleIn this example, all classes of entries in the bridge-forwarding database forGigabit Ethernet interface 1/0/1 are displayed.console#show mac address-table interface gigabitethernet 1/0/1Aging time is 300 SecVlan Mac Address Type Port---- -------------- ---- -------------1 0000.0001.0000 Dynamic Gi1/0/11 0000.8420.5010 Dynamic Gi1/0/11 0000.E26D.2C2A Dynamic Gi1/0/11 0000.E89A.596E Dynamic Gi1/0/11 0001.02F1.0B33 Dynamic Gi1/0/1show mac address-table staticUse the show mac address-table static command in User Exec or PrivilegedExec mode to display static entries in the bridge-forwarding database.Syntaxshow mac address-table static [address mac-address] [interface interface-id][vlan vlan-id]• mac-address —A MAC address with the format xxxx.xxxx.xxxx.• interface-id —Specify an interface type; valid interfaces include Ethernet portsand port channels.• vlan-id —Specify a valid VLAN; the range is 1 to 4093.Default ConfigurationThis command has no default configuration.Command ModeUser Exec, Privileged Exec mode, Global Configuration mode and allConfiguration submodesUser GuidelinesThis command has no user guidelines.
