Layer 3 Routing Commands 1588Default ConfigurationThis command has no default configuration.Command ModePrivileged Exec mode, Global Configuration mode and all ConfigurationsubmodesUser GuidelinesThis command has no user guidelines.ExampleThe following example displays the multicast configuration settings such asflags, timer settings, incoming and outgoing interfaces.console#show ip mroute group 239.5.5.5 summaryconsole#show ip mroute group 239.5.5.5show ip mroute sourceUse the show ip mroute source command to display the multicastconfiguration settings such as flags, timer settings, incoming and outgoinginterfaces, RPF neighboring routers, and expiration times of all the entries inthe multicast mroute table containing the sourceipaddr or sourceipaddr |groupipaddr pair value(s).Syntaxshow ip mroute source sourceipaddr {summary}• sourceipaddr — IP address of source.Default ConfigurationThis command has no default configuration.Command ModePrivileged Exec mode, Global Configuration mode and all Configurationsubmodes
