Layer 3 Routing Commands 1793User GuidelinesThis command has no user guidelines.ExamplesThe following examples show the parameters related to an individual tunneland to all tunnel interfaces.console#show interfaces tunnel 1Interface Link Status.......................... downMTU size....................................... 1480 bytesconsole#show interfaces tunnelTunnelId Interface TunnelMode SourceAddress DestinationAddress-------- --------- ---------- ------------- ----------------1 tunnel 1 IPv6OVER4 10.254.25.14 10.254.25.102 tunnel 2 IPv6OVER4 10.254.20.10tunnel destinationUse the tunnel destination command in Interface Configuration mode tospecify the destination transport address of the tunnel.Syntaxtunnel destination ip-addressno tunnel destination• ip-address — Valid IPv4 address.Default ConfigurationThis command has no default configuration.Command ModeInterface Configuration (Tunnel) mode.User GuidelinesThis command has no user guidelines.ExampleThe following example specifies the destination transport address of tunnel 1.
