Layer 2 Switching Commands 378Syntaxshow arp access-list [acl-name]• acl-name — A valid ARP ACL name (Range: 1–31 characters).Default ConfigurationThere is no default configuration for this command.Command ModePrivileged Exec, Global Configuration mode and all Configuration submodesUser GuidelinesThere are no user guidelines for this command.Exampleconsole#show arp access-listARP access list H2permit ip host 1.1.1.1 mac host 00:01:02:03:04:05permit ip host 1.1.1.2 mac host 00:03:04:05:06:07ARP access list H3ARP access list H4permit ip host 2.1.1.2 mac host 00:03:04:05:06:08show ip arp inspectionUse the show ip arp inspection command to display the Dynamic ARPInspection and status.Syntaxshow ip arp inspection [interfaces [interface-id] | statistics [vlan vlan-list] |vlan vlan-list]• interfaces [interface-id] — Display the Dynamic ARP Inspectionconfiguration on all the DAI enabled interfaces. Giving an interfaceargument, it displays the values for that interface only.