Switch Management Commands 1934ExampleThe following example shows the output from this command when thedevice has leased an IPv6 address from the DHCPv6 server on interfaceGi1/0/1.NOTE: Note that the interface is in client mode.console#show ipv6 dhcp interface vlan 2IPv6 Interface................................. Vl2Mode........................................... ClientState.......................................... ACTIVEServer DUID....................................00:03:00:01:00:13:c4:db:6c:00T1 Time........................................ 0 days 12 hrs 0 mins 0 secsT2 Time........................................ 0 days 19 hrs 12 mins 0 secsInterface IAID................................. 20Leased Address................................. 2017::309D:161:4EF1:DBB1/128Preferred Lifetime............................. 1 days 0 hrs 0 mins 0 secsValid Lifetime................................. 2 days 0 hrs 0 mins 0 secsRenew Time..................................... 0 days 11 hrs 55 mins 28 secsExpiry Time.................................... 1 days 23 hrs 55 mins 28 secsconsole#show ipv6 dhcp interface vlan 10IPv6 Interface................................. Vl10Mode........................................... RelayRelay Address.................................. 3030::3Relay Interface Number......................... RelayRelay Remote ID................................Option Flags...................................console#show ipv6 dhcp interface vlan 10IPv6 Interface................................. Vl10Mode........................................... ServerPool Name...................................... asdServer Preference.............................. 20Valid Lifetime The valid life time (in seconds) of the IPv6 Address leased bythe DHCPv6 Server.Renew Time The time remaining (in seconds) to send a DHCPv6 Renewrequest to DHCPv6 Server for the leased address.Expiry Time The time (in seconds) when the DHCPv6 leased addressexpires.Term Description
