Layer 2 Switching Commands 651Syntaxremote-spanno remote-spanDefault ConfigurationThere is no default configuration for this command.Command ModesVLAN Configuration mode.User GuidelinesRemote-span VLANs must be configured as a tagged VLAN on trunk orgeneral mode ports on RSPAN transit switches. Traffic in an RSPAN VLAN isalways flooded as MAC address learning and link local protocols are disabledon RSPAN VLANs. VLANs on transit switches must be configured as remote-span VLANs in order to ensure delivery of all mirrored packets. Remote-spanVLANs configured on transit switches may co-exist with other non remote-span VLANs on trunk ports. Do not configure the RSPAN VLAN as a memberof spanning tree (RSTP-PV or MST).Exampleconsole#vlan 10console(config-vlan10)#remote-spanshow monitor captureUse this command to display captured packets transmitted or received fromthe CPU.Syntaxshow monitor capture [packets]Default ConfigurationThis command has no default configuration.
