Layer 2 Switching Commands 301in the specified format. The vlan, address, and format parameters may all bespecified together.A MAC address can be displayed in IP format only if it is in the range01:00:5e:00:00:00 through 01:00:5e:7f:ff:ff.Static multicast MAC addresses can be added via the mac address-table staticcommand.ExampleIn this example, Multicast MAC address table information is displayed.console#show mac address-table multicastVlan MAC Address Type Ports----- ------------------- ------- ------------------1 0100.5E05.0505 StaticForbidden ports for multicast addresses:Vlan MAC Address Ports---- ----------------------- ---------------------------1 0100.5E05.0505NOTE: A multicast MAC address maps to multiple IP addresses, as shown above.Command HistoryThe description was updated in the 6.4 release.show mac address-tableUse the show mac address-table command in User Exec or Privileged Execmode to display all entries in the bridge-forwarding database.Syntaxshow mac address-tableDefault ConfigurationThis command has no default configuration.
