Switch Management Commands 1967ExampleThe following example displays information about IP hosts.console>show hostsHost name: dellswitchDefault domain: dell.comName/address lookup is enabledDNS source interface: loopback 1Name servers (Preference order): 176.16.1.18 176.16.1.19Configured host name-to-address mapping:Host Addresses-------------------------- ----------------------------accounting.dell.com 176.16.8.8Cache: TTL (Hours)Host Total Elapsed Type Addresses---------------- ----- ------- ------- -------------www.stanford.edu 72 3 IP 171.64.14.203show ip address-conflictUse the show ip address-conflict command in User Exec or Privileged Execmode to display the status information corresponding to the last detectedaddress conflict.Syntaxshow ip address-conflict [vrf vrf-name]• vrf-name—The name of the VRF instance on which the commandoperates. If no VRF parameter is given, information for the default(global) router instance is shown.Default ConfigurationThis command has no default configuration.Command ModeUser Exec, Privileged Exec mode, Global Configuration mode and allConfiguration submodes
