Switch Management Commands 2280ip http secure-certificateUse the ip http secure-certificate command to configure the active certificatefor HTTPS. To return to the default setting, use the no form of thiscommand.Syntaxip http secure-certificate numberno ip http secure-certificate• number—Specifies the certificate number. (Range: 1–2)Default ConfigurationThe default value of the certificate number is 1.Command ModeGlobal Configuration modeUser GuidelinesThe HTTPS certificate is imported using the crypto certificate importcommand in Global Configuration mode.ExampleThe following example configures the active certificate for HTTPS.console(config)#ip http secure-certificate 1ip http secure-portUse the ip http secure-port command to configure a TCP port on which theswitch listens for HTTPS connections. To use the default port, use the noform of this command.Syntaxip http secure-port port-numberno ip http secure-port
