Switch Management Commands 22281 PHY 34show tech-supportUse the show tech-support command to display system and configurationinformation for use in debugging or contacting technical support. The outputof the show tech-support command combines the output of the followingcommands:• show interfaces transceiver• show power inline• show switch stack-port counters• show nsf• show slot• show interfaces advertise• show interfaces advanced firmware• show lldp remote-device all• show interfaces counters errors• show fiber-ports optical-transceiver• show process cpu• show iscsi sessions• show ethernet cfm errors (N4000 series only)• show power inline firmware-version• show version• show interfaces transceiver propertiesSyntaxshow tech-support [ bgp | bgp-ipv6 | ospf | ospfv3 | bfd ] [file | usb]• bgp — Show detailed information specific to BGP.• bgp-ipv6 — Show detailed information specific to BGP IPv6.• ospf — Show detailed information specific to OSPF.• ospfv3 — Show detailed information specific to OSPFv3.• bfd — Show detailed information specific to BFD.• file — Write the output to a file in the local flash instead of the console.
