Dell EMC Networking CLI 103• VC — VLAN Configuration (reached via vlan command)• VRC—VRF Configuration• VR—Virtual Router Configuration• v6ACL — IPv6 Access List Configuration• v6CMC — IPv6 Class-Map Configuration• v6DP — IPv6 DHCP Pool ConfigurationLayer 2 CommandsACLCommand Description Mode aip access-list Creates an Access Control List (ACL) that isidentified by the parameter accesslistnumber.GCdeny | permit (IP ACL) The deny command denies traffic if theconditions defined in the deny statement arematched. The permit command allows traffic ifthe conditions defined in the permit statementare matched.MLdeny | permit (Mac-Access-List-Configuration)The deny command denies traffic if theconditions defined in the deny statement arematched. The permit command allows traffic ifthe conditions defined in the permit statementare matched.MLip access-group Attaches a specified access-control list to aninterface.GC orICmac access-group Attaches a specific MAC Access Control List(ACL) to an interface in the in-bounddirection.GC orICmac access-list extended Creates the MAC Access Control List (ACL)identified by the name parameter.GCmac access-list extendedrenameRenames the existing MAC Access Control List(ACL) name.GC
