Layer 3 Routing Commands 1424Syntaxip igmp last-member-query-count Imqcno ip igmp last-member-query-count• Imqc — Query count. (Range: 1-20)Default ConfigurationThe default last member query count is 2.Command ModeInterface Configuration (VLAN) modeUser GuidelinesThis command has no user guidelines.ExampleThe following example sets 10 as the number of VLAN 2 Group-SpecificQueries.console#configureconsole(config)#interface vlan 2console(config-if-vlan2)#ip igmp last-member-query-count 10console(config-if-vlan2)#no ip igmp last-member-query-countip igmp last-member-query-intervalUse the ip igmp last-member-query-interval command in InterfaceConfiguration mode to configure the Maximum Response Time inserted inGroup-Specific Queries which are sent in response to Leave Group messages.Syntaxip igmp last-member-query-interval tenthsofsecondsno ip igmp last-member-query-interval• tenthsofseconds — Maximum Response Time in tenths of a second(Range: 0-255)
